Treat and prevent rust from your tools by following a few simple steps.
Your tools will last a lifetime if you take care of them, but one of the biggest enemies of metal tools is rust, which can be prevented if the right precautions are taken.
What is Rust?
Rust is the product of metal corrosion, where a chemical reaction creates an “oxide” that’s expressed as the well-known red- or rust-colored powder.
This oxidation process breaks down of the underlying material and should be controlled or eliminated as it will significantly weaken the metal over time. There are several ways you can prevent corrosion in the first place, as well as steps to take to remove rust from tools that have undergone oxidation.
How to Remove Rust
Tool owners should have on hand a multi-purpose oil designed to clean, lubricate, and protect. To remove light rust from tools simply apply oil to a rag and wipe the metal thoroughly. If the articulating parts are rusted, working the oil into rusted joints multiple times is usually effective.
- Drop some oil into the joint and manipulate the tool back and forth, open and closed, grinding the rust and lubricant into a slurry.
- Taking a clean side of the rag, wipe up the slurry from the joint and, to make the tool usable again
- Repeat the oil application and manipulate the tool until you’re no longer getting a mixture of rust and oil on the rag.
If the rust problem is on the surface of the tool, and not inside the joints, you can scrub the oxidation off.
- Use a wire brush, sandpaper, or steel wool to remove all traces of rust.
- Pockmarks and scaling are particularly hard to remove, so power tools like a drill with a wire wheel attachment or a bench grinder with a metal wire buffer wheel can make short work of deeply rusted tool surfaces.
- Once the tool is thoroughly stripped of rust, deep lubrication of the entire tool surface with a non-oxidizing oil like mineral oil and a wipe down with a rag will finalize the rust removal process.
Moisture control is paramount in rust prevention. Storing your tools in a dry place is crucial. A sub-grade basement in an environment with a high water table will keep humidity levels high, promoting the formation of rust. Not a good spot for tool storage.
While the hinges on a wrench are an obvious place for rust to occur, tool owners often don’t often think about the delicate motors and electric brushes inside of power tools, which are made out of copper and other corrosion-prone metals. Keep all your tools above ground—and inside—if possible, or install a dehumidifier in your tool storage area if it’s humid but it’s your only storage solution.
Regular lubrication and cleaning of hand tools with a petroleum product are the most basic steps an owner can take to extend the longevity of a tool. Sometimes a single drop of multi-purpose oil in an articulating joint or gear will ensure a lifetime of use, and a multi-purpose oil-soaked rag wiped over the surface of any metal parts spreads a thin layer of protection against the elements that cause rust.
Painting and sealing up metal parts that are exposed to the elements are also great methods to prevent corrosion and rust. While most manufacturers provide a layer of chrome or powder-coating paint, many old tools do not have this protective coating. Good prep work is important for ensuring a quality bond, but a sealant like paint or rubber can extend the life of old tools and provide a new gripping surface for a fairly low cost.
For a long time, trekking has become a popular form of tourism in the world. To have a safe and complete trekking trip, trekking teams need to carefully prepare the necessary trekking tools. If you still do not know what to bring, please refer to our article shortly.
Specialized mountaineering – The most important trekking tool
You need to determine in advance that this trip is not just a walk or sightseeing. Therefore, all preparations must be considered and thoughtful. A dedicated climbing suit with optimal protection will be a must when trekking. In addition, you should also buy yourself a dedicated climbing hat to protect your head from wind, dust, and possible impacts.
However, if you cannot invest in an expensive specialized outfit, you can completely wear your usual outfit. Ideally, you should choose well-ventilated, fast-drying, stretchy sportswear that suits the constant movements of the trekking person. The humid mountainous environment is easy to produce insects and reptiles. To avoid being squeezed, snakes, or mosquitoes, you should prepare pants and a long-sleeved shirt.
Tools for sleeping in the woods
Surely you will have at least 1 night to sleep in the woods or in the middle of an empty lot. The weather in the forest or in the mountains lowers the temperature quite deeply at night. At the same time, the sounds of animals and insects in the forest will make you very uncomfortable. So, you need to prepare in advance to have a good night’s sleep. Without a deep sleep to regain lost energy, you will become tired and lose interest at the beginning of the day.
Usually, trekking groups will choose to camp overnight. To save space and save energy during the journey, you can choose to buy the best backpacking tent. You should bring a sleeping bag for the cold weather to keep your body warm while you sleep.
Map, compass – trekking tools ensure safety
For the best safety, your trekking trip should be led by a local or by joining a tour with experienced guides. If you want to explore the dangerous path on your own, a map or compass is an essential tool for trekking. You will be in control of your trip, knowing where you have gone and where you will be coming next. Without professional navigation tools, you can mark your travels with your own symbols so you don’t have to go around wasting time.
Large backpack – an indispensable trekking tool
All personal items, food, drinks, or tools to prepare for trekking are put in a backpack. Therefore, you should choose a large backpack, designed with many compartments to easily divide furniture as well as convenient when needed. The weight of a trekking backpack is about 5 – 10kg. Therefore, you should choose a backpack with power belts. It will help you to support your backpack, avoid focusing pressure at one point, causing you back pain, shoulder fatigue.
Medical first aid tools and medicine
Continuously having to cross vast forests, climb over steep rocky slopes or wade in fast-flowing streams makes you more susceptible to falling or scratching. A trekking kit that is useful for you at this time includes bandages, tape, gauze, rubbing alcohol, antiseptic … In addition, you should bring special medicines such as fever, headache, anti-inflammatory, pain relief, … To avoid attracting mosquitoes and harmful insects, you should bring mosquito repellent cream, insect spray. If possible, strengthen your health, improve your resistance with vitamin C effervescent tablets or instant ginseng bags. You can use it at meals and at bedtime.
Super bright flashlight
You won’t know what might happen to you staying overnight in the woods. So add to your list of trekking gear a bright headlamp or handheld flashlight. When you see the surrounding space, you will feel safe and in better control of the situation. When choosing to buy a lamp, you should pay attention to the parameters that the production introduces such as brightness, the weight of the lamp, battery life, lamp durability, lamp size …
If you have to set up a tent to sleep overnight, the rope is an indispensable trekking tool in your backpack. It will make the tent more stable and not fall over if there is strong wind or rain. In addition, when your expedition crosses the mountains or streams, use ropes to connect members of the crew to avoid getting lost or injured.
If you have to climb steep or steep mountains, ropes will be the best trekking tool to help you move faster. Let someone with the best health and skills in the crew anchor the ropes to a firm position, then your trekking team will take turns climbing the ropes to overcome this difficult challenge.
If you are preparing trekking equipment and you forgot a climbing stick, it is a pity. Because you have to move a lot on dangerous mountain roads, your feet will easily get tired because the gravity is too great. Now let the walking stick share the burden and support your knees and feet.
On the other hand, the stick can also eliminate the risk of slipping in wet rainy weather, your steps will also be more secure and safe. If there are many obstacles and large puddles on the way, you can use a stick to explore the terrain before you step down. The climbing stick has now become an essential item when trekking with many smart designs, which can be shortened and stretched arbitrarily and save space when stored in a backpack.
Although there are many dangers, trekking is a type of tourism that many young people love to explore. To have a safe trip, bring lots of memories, do not forget to prepare yourself with the most necessary trekking equipment. Wish you were always happy and discover many interesting things.
The onset of 3D printing has really taken us by storm. I bet no soul could imagine advancing from the monotonous 2D printing that has existed for centuries. And as if that was not enough, they came up with the 3D pen as well.
To think that you can create 3D models using a simple handheld device is incredible in its own right. So, yes! 3D pens are worth it. Check out the quality review for a comprehensive buying guide on the best 3D pens.
Are 3D pens worth it?
To further fortify this point, I find 3D pens more than worth it for the following reasons:
3D pens complement 3D printing. Once you print a mega model using the 3D printer, the 3D pen allows you to add finer details to the model. As such, your artistic capabilities are expressed to the full.
3D pens are a perfect tool for enhancing the creativity of kids. Instead of buying toys all the time, let them make their own using the 3D pens.
Coming to adults, aside from the professional craftsmen, 3D pens help grownups to relax their mind as they explore their creativity. Therapeutic indeed!
The versatility of 3D pens cannot be overemphasized. Given they are handheld, you can create virtually any shape you can think of.
What is the best 3D pen to buy?
As earlier suggested, Reviews Rabbit lists the top 10 kick-ass 3D pens you should really consider investing on. These are:
3D Simo Kit 2 – perfect for architects
3D Simo MultiPro – good for multitasking
3D Simo Basic 2 – perfect for kids
Lix Pen – smallest 3D pen and readily portable
MYNT3D PRO – suitable for aspiring and experienced designers
Dikale 07A 3D Pen – most budget-friendly 3D pen
3Doodler Create+ – used by professionals
AIO Printing Pen – good for adults
CoLiDo 3D Pen – suitable for beginners
Scribbler Duo – perfect for artists
How do beginners use 3D pens?
As a beginner, you need to have the following items before getting started:
It is also good to understand how 3D pens function. The filament is pulled through the pen by the help of a motor. At the tip of the pen, the filament is heated up so it flows smoothly out of the nozzle. You need to press the button at the side of the pen to keep the filament oozing out. You can also adjust the speed of the pen to achieve thicker or thinner lines.
Having these tips in mind, you can:
Make whatever 3D object you wish.
You can also add raised decorations to household items like flower vases.
Repair items manufactured using 3D printers
Draw all kinds of geometric shapes and figures.
Is 3D printing expensive?
Regarding costs, there are quite a number of factors that dictate the costs of 3D printing. Perhaps the most obvious is the size of the object you intend to print. Larger objects end up being expensive because of the amount of filament and electricity used. Smaller objects are somewhat inexpensive to print.
A good 3D printer will cost you around $800, but there are models priced as low as $200
A multimeter is an indispensable tool for electricians because it enables the electrician to control every possible electrical situation.
Also if you are not an electrician, but if you have a multimeter at home then it is really useful for checking sockets, switches, or other electrical equipment in trouble.
I would like to share with you about the multimeter, its functions, and the types available on the market today.
What is a multimeter?
It is an electrical testing tool with many different functions such as resistance, volts, amps.
Just as it performs various tasks to test, assemble, repair electrical equipment, electronic at the home, factory, Measuring device.
Applicable temperature and environment
- Low-cost weather station
- DMM internal temperature
- Measure high and low DC values
- Average Measurement from Peak to Peak and DC
- Measure DC
- True RMS AC
Measurement of resistor
- Small ohm meter
- Measure resistor with constant voltage
- Measure resistor with constant current
Time and frequency measurement
- Fast frequency
- Measure time
Types of multimeters you need to know.
Analog multimeter or call VOM (Volt-Ohm-Milammeter). The measured values are determined by the deviation of the indicator on the scale from the point ‘0’. This indicator is connected to an iron core. This iron core moves through permanent magnets. When the iron is moving at the same time the pointer moves. Before taking the measurement, you must correct the ‘0’ point. VOM is for simple measurements, with a large range of errors, so its cost is relatively comfortable.
Digital multimeter or (DMM). Its measurements are displayed on the LCD screen, the measurements are done through 2 probes, one black is always connected to COM port, red is connected port symbol (VΩmA) if it is It is used to measure voltage V, resistance Ω, small current mA or connected to the symbol port (A) if we want to measure large value A current (note the measuring current does not exceed the allowed value stated above digital multimeter)
Digital multimeter has high accuracy and is very safe, easy to use, multi-function. So nowadays most of them use a digital multimeter, but its cost is also higher than an analog multimeter. You should choose one that is suitable for your purpose.
Digital multimeter has two more types: clamp digital multimeter and auto-ranging multimeter.
Clamp digital multimeter
To measure the current on the device, you just need to turn the knob to the ‘A ‘position to switch to current measurement then hook the clamp meter to the wire to read the value. Very large currents can be measured depending on the permissible range of the meter. In addition, it can measure power, measure volts.
Note when using you must install in accordance with the scale.
An auto-ranging multimeter is a multimeter in which you can easily measure voltage and resistance without knowing its range in advance.
For example, if you want to measure the AC voltage, you just need to turn on the AC voltage scale without considering it in the range of 10v, 100v, 400v.
Above I have introduced you to know the types of the multimeter. If you are willing to buy you one then consider what your intended use is and what kind of watch it is suitable for on the market.
Wish you choose the right multimeter for you.